Steam Distributino System Drip Legs Form

Please fill out the form below.

Company (required)

Shipping address (required)

City/State/Zip Code (required)

Contact Person (First/Last Name) (required)

Phone # (required)

Fax #

Email address (required)

Steam Distribution System Information

Steam system pressure = __________ psig (required)

Is the steam saturated? yes or no (required)

Pipe diameter of the steam distribution header = __________ inches (required)

Length of the steam distribution header draining to this point = __________ feet (required)

Where is the header located? indoors or outdoors

Type of insulation on steam header? fiberglass or calcium silicate or mineral wool or other:__________ (required)

Insulation thickness = __________ inches (required)

Condensate Return System Information

Condensate system back pressure or lift = __________ psig or feet (required)

Existing Steam Trap Information

Pipe size = __________ inches (required)

Type of connection? NPT or socket weld or other:__________ (required)

Station tag # or location description (required)

Steam System Start-Up Procedure

Are manual drain valves on the distribution system opened during start-up? yes or no (required)

If not; the steam system is brought from 0 psig to operating pressure in __________ hours

Additional Notes

Add any additional notes below

This field should be left blank

Please wait...